The fast size detector is suitable for batch measurement of small size workpieces such as auto parts, gears, springs, screws, etc; It is fast and easy to operate. For complex workpieces, it can be quickly measured with one key, greatly improving the measurement efficiency
Fast measurement software
1) The programming is simple to modify. If the previously programmed program has problems or the product has changes, you can call out the program, click the "Edit" function key to modify the program, and then click "Save" after modification.
2) The report function is powerful, and the product tolerance can be set to automatically judge whether it is qualified or unqualified; CPK analysis can be conducted; You can save the set common tables in Public Reports and call them directly when you use them; You can import the EXCEL parent table made by the customer into the report, directly output the measurement data to the specified cell and get the analysis in the report. The report is saved in PDF, DOC, XLS, TXT, etc.
3) A variety of lighting sources can be selected, so that the range of measurable products is wider: in addition to the standard 100 * 100 flat light (the current one button commonly used transmission light lighting on the market), the backlight can be equipped with a parallel far core light source; In addition to the standard 360 no dead angle LED shadowless lamp, the upper lamp can also be equipped with coaxial light and low angle light to comprehensively solve the lighting light required for various product measurements.
Main features:
1) Automatic image registration function, no need to locate the workpiece, no need to clamp, the product is placed at random, to achieve automatic identification and measurement; Multiple measuring workpieces can be identified and measured at the same time, and the results can be output;
2) The image sensor adopts imported high-definition 6 million pixel CCD, and the Gige Gigabit Ethernet card (transmission rate: 1G/S) matched with it makes the image clear and fine;
3) Imported bilateral telecentric lenses are used, together with parallel telecentric transmission light (transmission system), programmable four zone annular shadowless falling light (falling light system), coaxial falling light and low angle shadowless falling light (optional light source), to ensure the authenticity, stability and observability of the product image to be measured, making the measured data very close to the true value, and the repeated measurement data very stable, The operator will not doubt the measurement results due to large data differences.
Contact Now
